Cartridge Heating Technology

The COX Caulk Warmer (heated bag) allows an easier application when the outside temperatures are low. The viscosity is reduced by pre-heating the sealants or adhesives in cartridges or sachets.

This bag is made of hard wearing and water resistant nylon and well insulated. A temperature of 50°C (+/- 5°C) can be reached by using the adjustable heating element.

Size:

Length: 490mm

Width: 390mm

Depth: 70mm

Can heat up to 12 cartridges (310ml) and has a small pouch on the outside for accessories.

Product Code: COX2133

A smaller version is available: COX Caulk Warmer Junior

The COX Caulk Warmer Junior (heated bag) allows an easier application when the outside temperatures are low. The viscosity is reduced by pre-heating the sealants or adhesives in cartridges or sachets.

This bag is made of hard wearing and water resistant nylon and well insulated. A temperature of 50°C (+/- 5°C) can be reached by using the adjustable heating element.

Size:

Length: 330mm

Width: 230mm

Depth: 70mm

Can heat up to 4 cartridges (310ml)

Product Code: COX2134

A bigger version is also available: COX Caulk Warmer

**NEW Development**

Cartridge heater for 2 cartridges with temperatures adjustable from 20°C to 160°C

Features:

• Precise adjustable ± 1°C
• Digital display with desired and current temperature
• Temperature sensor is located between the two barrels at the top
• Automated correction between sensor and temperature in the middle of cartridge
• Heat output 200W (same temperature curve as competitors' products with 500W)
• Made in Germany with CE marking
• Compact device - less than 3.0kg in weight
• Choice of colour (Minimum order quantity:100)

Product Code: INN1000

Controllable cartridge pre-heater for 2 cartridges

Cartridge heater takes 2 cartridges and is mounted on a stand.

Features:

• 500W heat ouptput; fast heating for increased productivity
• Adjustable temperatures from 40°C to 140°C with a display at the top of the device
• Robust design and portable
• Cartridges sit at an angle for easy handling
• Great value for money if you are looking for a controllable heating device

Product Code: ITR1338

Teroson Heating Device IDH 211556 for 2 cartridges; pre-heating to 70°C. The temperature is not adjustable.

Teroson Cartridge Heating Case IDH 796993 for up to 6 cartridges (310ml), 5 sachets (400ml) or 3 twin cartridges (up to 490ml)

2 levels of pre-heating:

1. level 1: 65°C
2. level 2: 90°C

The temperature can be chosen not adjusted.

Features:

• Great insulation retains heat
• Easy transport with practical handles
• Up to 3 twin cartridges (490ml) can also be pre-heated in this case

COX Cordless Cartridge Applicator ELECTRAFLOW 18V with in-built heating technology.

The temperature can be set as required up to 228°C and is shown in the digital display.

Features:

• The only heated dispensing tool on the market in this power range
• High compressive force up to 350kg
• The only dispenser that can be used with 310ml AND 400ml cartridges
• Available in a set with metal nozzles (2-8mm diameter)
• Ideal for use with hot melt cartridges like Macroplast QR 4663 or QR 3460 with a high melting point
• Available in a robust high quality case
• We also offer a filling service; we fill aluminium cartridges wit your hot melt granules

COX heated pneumatic applicator "HP Sherborne" with in-built heating technology.

The temperature can be set as required up to 228°C and is shown in the digital display.

Features:

• Available in a complete set with conversion kit for use with sachets
• Compressive force of up to 220kg, can also be improved to 270kg by us
• The only heated pneumatic tool available that can also be used A1 400ml cartridges
• Available in a set with metal nozzles (2-8mm diameter) and a robust high quality case
• Ideal for use with hot melt cartridges like Macroplast QR 4663 or QR 3460 with a high melting point
• We also offer a filling service; we fill aluminium cartridges with your hot melt granules

Set of metal nozzles for heated cartridge application tools.

Metal nozzles with thread M15 x 1.5 for aluminium cartridges 310ml, for example to be used with Macroplast QR 4663 and QR 3460, Macromelt QR 6204 and others.

Set contains 7 nozzles with diameters 2, 3, 4, 5, 6, 7, and 8 mm

Set of metal nozzles for heated cartridge application tools.

Metal nozzles with thread M15 x 2.5 for aluminium cartridges 310ml with special thread.

Set contains 7 nozzles with diameters 2, 3, 4, 5, 6, 7, and 8 mm

Conversion kit for sachets used in heated dispensers.

Fits the battery operated ELECTRAFLOW dispenser or HP SHERBORNE air operated dispenser.

Conversion kit in stock!