Innotech GmbH

Cartridge Heating Technology

Reduce Viscosity

To create a constant process environment, we recommend the tempering of sealants and adhesives.

By doing this the viscosity of the material will be lowered and allows for an easier application of the material.

Fixed process parameters from work instructions can be followed accurately.

Further possible applications would be for products which start curing already in their "cool-down" phase or specialized high performance adhesives.

Consult us for your ideal heating technology!

We differentiate between:

  • Stationary Cartridge Heating Technology. These are cartridge ovens, cartridge heating boxes and cartridge heating cases.
  • Mobile Cartridge Heating Technology. These are heated cartridge dispensers and granulate applicators, which also provide the heating treatment during the application process.

CAULK WARMERS (Heated Bags)

The Aim: Heat sealants/adhesives to reduce their viscosity and make the application easier.

COX Caulk Warmer

The COX Caulk Warmer (heated bag) allows an easier application when the outside temperatures are low. The viscosity is reduced by pre-heating the sealants or adhesives in cartridges or sachets.

This bag is made of hard wearing and water resistant nylon and well insulated. A temperature of 50°C (+/- 5°C) can be reached by using the adjustable heating element.

Size:

Length: 490mm

Width: 390mm

Depth: 70mm

Can heat up to 12 cartridges (310ml) and has a small pouch on the outside for accessories.

Product Code: COX2133

A smaller version is available: COX Caulk Warmer Junior


COX Caulk Warmer

COX Caulk Warmer Junior

The COX Caulk Warmer Junior (heated bag) allows an easier application when the outside temperatures are low. The viscosity is reduced by pre-heating the sealants or adhesives in cartridges or sachets.

This bag is made of hard wearing and water resistant nylon and well insulated. A temperature of 50°C (+/- 5°C) can be reached by using the adjustable heating element.

Size:

Length: 330mm

Width: 230mm

Depth: 70mm

Can heat up to 4 cartridges (310ml)

Product Code: COX2134

A bigger version is also available: COX Caulk Warmer


COX Caulk Warmer Junior

CONTROLLABLE CARTRIDGE HEATERS

Adjustable Cartridge Heater up to 160°C

**NEW Development**

Cartridge heater for 2 cartridges with temperatures adjustable from 20°C to 160°C

Features:

  • Precise adjustable ± 1°C
  • Digital display with desired and current temperature
  • Temperature sensor is located between the two barrels at the top
  • Automated correction between sensor and temperature in the middle of cartridge
  • Heat output 200W (same temperature curve as competitors' products with 500W)
  • Made in Germany with CE marking
  • Compact device - less than 3.0kg in weight
  • Choice of colour (Minimum order quantity:100)

Product Code: INN1000


Adjustable Cartridge Heater up to 160°C

Cartridge Heater for 2 Cartridges

Controllable cartridge pre-heater for 2 cartridges

Cartridge heater takes 2 cartridges and is mounted on a stand.

Features:

  • 500W heat ouptput; fast heating for increased productivity
  • Adjustable temperatures from 40°C to 140°C with a display at the top of the device
  • Robust design and portable
  • Cartridges sit at an angle for easy handling
  • Great value for money if you are looking for a controllable heating device

Product Code: ITR1338


Adjustable Cartridge Heater up to 140°C for Two Cartridges

CARTRIDGE HEATERS WITHOUT CONTROLS

The Aim: to heat cartridges and/or sachets to a set temperature (relative precision, not adjustable)

Teroson Heating Device IDH 211556

Teroson Heating Device IDH 211556 for 2 cartridges; pre-heating to 70°C. The temperature is not adjustable.


Teroson Cartridge Heating Box Double

Teroson Cartridge Heating Case IDH 796993

Teroson Cartridge Heating Case IDH 796993 for up to 6 cartridges (310ml), 5 sachets (400ml) or 3 twin cartridges (up to 490ml)

2 levels of pre-heating:

  1. level 1: 65°C
  2. level 2: 90°C

The temperature can be chosen not adjusted.

Features:

  • Great insulation retains heat
  • Easy transport with practical handles
  • Up to 3 twin cartridges (490ml) can also be pre-heated in this case

Teroson Cartridge Pre-Heating Box IDH 796993

HEATED CARTRIDGE DISPENSERS

Heated Cartridge Dispenser ELECTRAFLOW 18V, 20-228°C

COX Cordless Cartridge Applicator ELECTRAFLOW 18V with in-built heating technology.

The temperature can be set as required up to 228°C and is shown in the digital display.

Features:

  • The only heated dispensing tool on the market in this power range
  • High compressive force up to 350kg
  • The only dispenser that can be used with 310ml AND 400ml cartridges
  • Available in a set with metal nozzles (2-8mm diameter)
  • Ideal for use with hot melt cartridges like Macroplast QR 4663 or QR 3460 with a high melting point
  • Available in a robust high quality case
  • We also offer a filling service; we fill aluminium cartridges wit your hot melt granules

Heated Cartridge Dispenser 18V

Heated Pneumatic Dispenser for Hot Melt Cartridges

COX heated pneumatic applicator "HP Sherborne" with in-built heating technology.

The temperature can be set as required up to 228°C and is shown in the digital display.

Features:

  • Available in a complete set with conversion kit for use with sachets
  • Compressive force of up to 220kg, can also be improved to 270kg by us
  • The only heated pneumatic tool available that can also be used A1 400ml cartridges
  • Available in a set with metal nozzles (2-8mm diameter) and a robust high quality case
  • Ideal for use with hot melt cartridges like Macroplast QR 4663 or QR 3460 with a high melting point
  • We also offer a filling service; we fill aluminium cartridges with your hot melt granules

Heated Cartridge Dispenser (pneumatic) for Hot Melts

ACCESSORIES

Set of Metal Nozzles M15 x 1.5mm for Heated Cartridge Dispensers

Set of metal nozzles for heated cartridge application tools.

Metal nozzles with thread M15 x 1.5 for aluminium cartridges 310ml, for example to be used with Macroplast QR 4663 and QR 3460, Macromelt QR 6204 and others.

Set contains 7 nozzles with diameters 2, 3, 4, 5, 6, 7, and 8 mm


Metal Nozzle Set for Heated Dispensers/Hot Melts

Set of Metal Nozzles M15 x 2.5mm for Heated Cartridge Dispensers

Set of metal nozzles for heated cartridge application tools.

Metal nozzles with thread M15 x 2.5 for aluminium cartridges 310ml with special thread.

Set contains 7 nozzles with diameters 2, 3, 4, 5, 6, 7, and 8 mm


Metal Nozzle Set for Heated Dispensers/Hot Melts

Conversion Kit for Sachets for Heated Cartridges

Conversion kit for sachets used in heated dispensers.

Fits the battery operated ELECTRAFLOW dispenser or HP SHERBORNE air operated dispenser.

Conversion kit in stock!


Conversion Kit (for Sachets) for Heated Dispensers